Exploring Canadian Career Firefighters' Understanding of the Return-to-Work Process After Musculoskeletal Injuries.

PURPOSE: Firefighters perform dangerous and physically demanding work, increasing their risk of musculoskeletal injuries that can lead to work absences. Return-to-work procedures can help firefighters return-to-work sooner and safely. The purpose of this study was to explore what firefighters understand about return-to-work procedures in their workplaces, and what firefighters believe the facilitators and barriers to return-to-work are. METHODS: Thirty-eight Canadian career firefighters were recruited for semi-structured interviews. Qualitative descriptive methods were used to analyze the transcripts. Two researchers performed the inductive coding and thematic analysis. RESULTS: Five themes were identified: 1. Variation in the return-to-work process knowledge among firefighters based on their experiences; 2. Accessible medical resources and treatments to support injury recovery; 3. Light duties must be meaningful and suitable; 4. Pressures to return-to-work too soon may lead to negative consequences; and 5. Heavy physical demands of firefighting may become a barrier for return-to-work. 'Factors affecting RTW depended on personal experiences and context' was the overarching theme identified, as many reported facilitators for return-to-work were also reported as barriers in different contexts. There was a variation in the experiences and understanding of return-to-work. CONCLUSION: There is a lack of knowledge of the return-to-work processes. Firefighters require access to clear return-to-work policies and procedures and treatments that are targeted to firefighting duties to support recovery from injuries and regain physical abilities after an injury. Firefighters must be able to perform all essential duties before returning to firefighting work, as returning to work too soon can lead to further injury.

"Staying in the present moment is important": Examining the impact of a short-term classroom-based mindfulness intervention among first-year students.

Objective: To determine the impact of four classroom-based sessions on mindfulness and symptoms of psychological distress among first-year students. A secondary objective was to explore participants' involvement experiences. Participants: First-year undergraduate students at a Canadian university were recruited. Methods: A mixed-methods pre-experimental design with repeated measures was used. The mindfulness intervention involved four, 15-minute sessions delivered by a counselor from the university's Student Health and Wellness center. Results: A significant positive change to participants' mindfulness scores from pre- to post-intervention was observed. Qualitatively, themes relating to intervention benefits, challenges, and logistics emerged. Conclusions: Collectively, results supported the utility of this brief mindfulness intervention delivered to first-year students. Participants were appreciative of the techniques learned and the "in-class" delivery format. Given the pressures faced by post-secondary students, collaborating with student wellness centers in this way may represent a novel and efficient approach for attenuating health risks while promoting their personal wellness.

Rasch analysis of the brief Michigan Hand Questionnaire in patients with thumb osteoarthritis.

BACKGROUND: The brief Michigan Hand Questionnaire (brief MHQ) is a 12-item self-reported measure of hand function for patients with hand disorders which has been validated using Classical Test Theory. Rasch analysis can provide more detailed psychometric information. The purpose of this Rasch analysis is to assess the psychometric properties of the brief MHQ for patients with thumb osteoarthritis, and to make recommendations for improvements to the questionnaire if needed.  METHODS: The Michigan Hand Questionnaire and demographic data were collected from 923 thumb osteoarthritis patients treated in specialized clinics for hand surgery and therapy in the Netherlands. Rasch analysis was performed on the 12 items of the brief MHQ using RUMM 2030 to assess the fit of the brief MHQ to the Rasch model. To determine fit, analysis of fit summary statistics, individual person fit and individual item fit were assessed. Threshold distributions were assessed to identify if any items required rescoring. The Person Separation Index was calculated to measure reliability of the questionnaire. Differential item functioning was assessed to identify item bias, and Principal Component Analysis was performed to identify unidimensionality and local dependence. RESULTS: The brief MHQ showed misfit (χ2 = 1312.5, p < 0.0001) with 6 items having disordered thresholds and 9 items requiring rescoring. After deleting 3 of the rescored items due to significant item fit residuals, the brief MHQ had an acceptable reliability (Cronbach's alpha = 0.79). Misfit to the model (χ2 = 49.6, p = 0.0001), multidimensionality (10.2% of t-tests were significant), and item bias from non-uniform differential item functioning for 7 items across many person variables were still found. CONCLUSION: Although no satisfactory solutions were found to correct the misfit to the Rasch model, it is recommended that the response options of the brief MHQ be rescored, and that items 6, 9 and 10 be removed. The lack of unidimensionality indicates that the items do not represent the singular construct of hand disability and that totalling the scores of the brief MHQ does not provide a valid measure of hand disability for people with thumb osteoarthritis. The 37-item Michigan Hand Questionnaire may provide a better assessment of hand disability for patients with thumb osteoarthritis.

Identifying predictors of return to work and the duration of time off work in first responders affected with musculoskeletal injuries or mental health issues.

PURPOSE: To identify predictors of return to work, duration of time off work, and claim closure for first responders experiencing injuries or illnesses, and summarize the claim data. METHODS: First responder claims collected between January 2012 and July 2017 were obtained from a disability management company. Known predictors of return to work were extracted from the data including age, sex, diagnosis, years of service, claim lag, medical report lag, and the return-to-work duties. Survival analyses were performed to identify predictors of return to work and claim closure using the Cox proportional regression analysis. Log-rank tests were performed to identify predictors that affected the rate of return to work and claim closure. Summary statistics were performed for the injury and return-to-work data. RESULTS: 60 of the 67 (89.6%) identified first responders returned to work within the data collection period. Musculoskeletal injuries predicted an increased likelihood of returning to work (hazard ratio = 2.0, 95%CI = 1.14-3.60) and a shorter duration of time off work (37 days on average) compared to mental health issues. Everyday of claim lag and medical report lag predicted a 2% decrease in likelihood of return to work. Returning to work was the only predictor of claim closure. 45 (67.2%) first responders returned to their pre-absence duties. 22 (32.8%) mental health claims and 45 (67.2%) injury claims were identified. CONCLUSIONS: 89.6% of first responders returned to work, although only 67.2% returned to their pre-absence duties. Predictors of return to work included injury type, as first responders with musculoskeletal injuries returned to work sooner, and claim and medical lag delayed the return to work.

Inter-Instrument Reliability and Agreement of Fitbit Charge Measurements of Heart Rate and Activity at Rest, during the Modified Canadian Aerobic Fitness Test, and in Recovery.

Purpose: We determined the inter-instrument reliability and agreement parameters of the Fitbit Charge Heart Rate (Charge HR) device during three phases: rest, modified Canadian Aerobic Fitness Test (mCAFT), and recovery. Method: We recruited 60 participants for this cross-sectional measurement study using convenience and snowball sampling approaches. The performance of the Charge HR was assessed throughout the rest, mCAFT, and recovery phases. To establish inter-instrument reliability, the Charge HR variables - heart rate, steps taken, and energy expenditures - were compared with those for two other devices: the Zephyr BioHarness (ZB) for heart rate and the Fitbit One for steps taken and energy expenditure. Measurements were recorded every 30 seconds. Results: At rest, the inter-instrument intra-class correlation coefficient (ICC) (standard error of measurement [SEM]) for the Charge HR versus the ZB was ≥ 0.97 (range, min-max, 1.02-1.32). During the mCAFT and in recovery, the ICCs (SEMs) for the Charge HR and the ZB were ≥ 0.89 (range, min-max, 1.30-3.98) and ≥ 0.68 (range, min-max, 3.58-8.35), respectively. During the mCAFT only, the number of steps taken and the energy expenditure recorded by the Charge HR and the Fitbit One displayed ICCs (SEMs) of 0.97 (83.00) and 0.77 (14.70), respectively. The average agreement differences in heart rate in this pair-wise device comparison indicated mean differences of -0.20, 4.00, and 1.00 beats per minute at rest, during the mCAFT, and in recovery, respectively. Conclusions: The Charge HR heart rate variable demonstrated excellent inter-instrument reliability compared with the ZB and provided good levels of agreement. The steps taken and energy expenditure variables displayed excellent reliability measures between Charge HR and Fitbit One. Our findings may be used to capture field-based wireless measures of heart rate in various phases and provide information about possibly using the Charge HR and ZB devices interchangeably.

Objectif : déterminer la corrélation interinstrument et les paramètres de concordance du bracelet Fitbit Charge pour la fréquence cardiaque (Charge FC) pendant trois phases : repos, physitest aérobie canadien modifié (PACm, un test de capacité aérobique) et récupération. Méthodologie : les chercheurs ont recruté 60 participants pour cette étude transversale de mesures faisant appel aux approches d'échantillonnage de commodité et en boule de neige. Ils ont évalué le rendement du bracelet Charge FC pendant les phases de repos, de PACm et de récupération. Pour établir la corrélation interinstrument, ils ont comparé les variables du bracelet Charge FC (fréquence cardiaque, pas effectués et dépense énergétique) à celles de deux autres dispositifs : le Zephyr BioHarness (ZB) pour la fréquence cardiaque et le Fitbit One pour les pas effectués et la dépense énergétique. Ils ont enregistré les mesures toutes les 30 secondes. Résultats : au repos, le coefficient de corrélation intraclasse (CCI) interinstrument (erreur-type de mesure [ETM]) du Charge FC par rapport au ZB était de ≥ 0,97 (plage minimum-maximum de 1,02 à 1,32). Pendant le PACm et la récupération, le CCI (ETM) du Charge FC par rapport au ZB était ≥ 0,89 (plage minimum-maximum de 1,30 à 3,98) et ≥ 0,68 (plage minimum-maximum de 3,58 à 8,35), respectivement. Pendant le PACm seulement, le nombre de pas effectués et les dépenses énergétiques enregistrés par le Charge FC et le Fitbit One indiquaient un CCI (ETM) de 0,97 (83,00) et 0,77 (14,70), respectivement. Selon les différences moyennes de concordance de la fréquence cardiaque de cette comparaison par paire, les différences moyennes étaient de ­0,20, 4,00 et 1,00 battements à la minute (battements/min) au repos, pendant le PACm et la récupération, respectivement. Conclusion : la variable de la fréquence cardiaque du bracelet Charge FC présentait une excellente corrélation interinstrument par rapport au dispositif ZB et un bon niveau de concordance. Les variables des pas effectués et de la dépense énergétique présentaient d'excellentes mesures de concordance entre le bracelet Charge FC et le dispositif Fitbit One. Ces résultats peuvent servir à saisir les mesures sans fil de la fréquence cardiaque à diverses phases sur le terrain et fournir de l'information sur l'interchangeabilité possible du bracelet Charge FC et du dispositif ZB.

Evaluating the effect of a strength and conditioning program to improve paramedic candidates' physical readiness for duty.

BACKGROUND: The Ottawa Paramedic Physical Ability Test (OPPAT™) is a physical employment standard for the paramedic sector. If a candidate is unsuccessful in meeting the OPPAT™ performance standard they should be provided with an appropriate accommodation, such as a strength and conditioning program, to improve performance. OBJECTIVE: Develop, implement and evaluate the effectiveness of a 4-week strength and conditioning program on improving OPPAT™ performance and associated fitness measures in paramedic candidates. METHODS: A 4-week strength and conditioning program was developed to focus on strength and power improvements. Based on initial OPPAT™ performance, participants were divided into high and low performing groups; only the low performing group received the training intervention. OPPAT™ completion times and relevant fitness measures were compared pre- to post- intervention and between groups. RESULTS: Over the 4-weeks, peak lower body power and grip strength did not significantly improve in the intervention group, however OPPAT™ performance improved by 10%. The control group had significantly lower OPPAT™ completion times both pre- and post-intervention (19% and 11% lower respectively), as well as greater grip strength and peak lower body power. CONCLUSIONS: Implementation of a targeted strength and conditioning program successfully improved OPPAT™ performance in low performing candidates.

The Ottawa Paramedic Physical Ability Test: test-retest reliability and analysis of sex-based performance differences.

The Ottawa Paramedic Physical Ability Test (OPPAT) is a physical employment standard (PES) that candidates must pass as a pre-hire requirement and that incumbents may have to pass prior to returning to work after absence, to demonstrate their physical capabilities as required to safely meet the demands of paramedic work. Consistent with best practice guidelines for PES development, it is important to establish reliability and to investigate sex-based performance differences. Active duty paramedics completed the OPPAT twice while candidates completed the OPPAT six times. Across all participants, a median improvement of 76.0 s was observed in OPPAT performance (922.0-846.0 s) between trial 1 and trial 2. Among candidates, OPPAT performance stabilised by the fourth trial confirming reliability. Sex-based analyses revealed median differences in OPPAT performance time of 39.0 and 63.0 s between males and females during the first and second trials respectively. Practitioner summary: Active duty paramedics and candidates performed the Ottawa Paramedic Physical Ability Test (OPPAT) faster following familiarisation. Among candidates, performance time stabilised by the fourth trial. Performance time was slower among females, but this had less impact on females' ability to meet the OPPAT standard.

Reliability of Zephyr Bioharness and Fitbit Charge Measures of Heart Rate and Activity at Rest, During the Modified Canadian Aerobic Fitness Test, and Recovery.

Nazari, G, MacDermid, JC, Sinden, KE, Richardson, J, and Tang, A. Reliability of Zephyr Bioharness and Fitbit Charge measures of heart rate and activity at rest, during the modified Canadian Aerobic Fitness Test, and recovery. J Strength Cond Res 33(2): 559-571, 2019-The purpose of this study was to determine the intrasession and intersession reliability of Zephyr Bioharness (ZB) and Fitbit Charge variables in both healthy men and women at rest, during the Modified Canadian Aerobic Fitness Test (mCAFT), and throughout recovery. Stratified convenience and snowball sampling were used to recruit 60 participants (30 women, 48 ± 15 years) and (30 men, 48 ± 15 years) from McMaster University student, staff, and faculty population. At rest, intrasession average heart rate (b·min). Intraclass correlation coefficients (ICCs) and Standard Error of Measurement [SEM] for Zephyr ranged from (0.94-0.97) [1.17-1.70] to (0.92-0.97) [1.45-2.10] for Fitbit Charge. During the mCAFT, the Zephyr ICCs and (SEM) ranged from 0.31-0.99 (1.28-8.10) to 0.45-0.99 (1.45-8.71) for the Fitbit Charge. Throughout the recovery, the ICCs and (SEM) ranged from 0.44-0.98 (1.26-10.47) to 0.45-0.98 (1.15-11.90) for Zephyr and Fitbit devices, respectively. At rest, intersession ICCs (SEM) for Zephyr and Fitbit ranged from 0.90-0.94 (1.73-2.37) to 0.88-0.94 (1.83-2.67), respectively. At mCAFT, the Zephyr ICCs (SEM) ranged from 0.91-0.97 (3.12-4.64) to 0.85-0.98 (3.28-4.88) for the Fitbit. Throughout the recovery, the ICCs (SEM) ranged from 0.93-0.97 (2.65-4.66) to 0.76-0.91 (3.17-4.67) for Zephyr and Fitbit devices, respectively. To conclude, both the ZB and Fitbit Charge devices demonstrated excellent reliability measures throughout the 3 phases. The findings from our study add to the existing pool of literature regarding the reliability parameters of wearable devices and suggest that stable and consistent measures of heart rate and physical activity can be obtained using ZB and Fitbit Charge devices among healthy male and female participants at rest, during a standardized submaximal fitness test (mCAFT), and throughout recovery.

Work Functioning Among Firefighters: A Comparison Between Self-Reported Limitations and Functional Task Performance.

Purpose Performance-based and disease indicators have been widely studied in firefighters; self-reported work role limitations have not. The aim of this study was to describe the distributions and correlations of a generic self-reported Work Limitations Questionnaire (WLQ-26) and firefighting-specific task performance-based tests. Methods Active firefighters from the City of Hamilton Fire Services (n = 293) were recruited. Participants completed the WLQ-26 to quantify on-the-job difficulties over five work domains: work scheduling (4 items), output demands (7 items), physical demands (8 items), mental demands (4 items), and social demands (3 items). A subset of participants (n = 149) were also assessed on hose drag and stair climb with a high-rise pack performance-based tests. Descriptive statistics and correlations were used to compare item/subscale performance; and to describe the inter-relationships between tests. Results The mean WLQ-26 item scores (/5) ranged from 4.1 to 4.4 (median = 5 for all items); most firefighters (54.5-80.5%) selected "difficult none of the time" response option on all items. A substantial ceiling effect was observed across all five WLQ-26 subscales as 44.0-55.6% were in the highest category. Subscale means ranged from 61.8 (social demands) to 78.7 (output demands and physical demands). Internal consistency exceeded 0.90 on all subscales. For the hose drag task, the mean time-to-completion was 48.0 s (SD = 14.5; range 20.4-95.0). For the stair climb task, the mean time-to-completion was 76.7 s (SD = 37.2; range 21.0-218.0). There were no significant correlations between self-report work limitations and performance of firefighting tasks. Conclusions The WLQ-26 measured five domains, but had ceiling effects in firefighters. Performance-based testing showed wider score range, lacked ceiling effects and did not correlate to the WLQ-26. A firefighter-specific, self-report role functioning scale may be needed to identify compromised work role capabilities in firefighters.

Comparison of Canadian firefighters and healthy controls based on submaximal fitness testing and strength considering age and gender.

INTRODUCTION: Few studies have addressed whether firefighters are fitter than the general population and possess sufficient levels of aerobic capacity and muscle strength to perform on-duty tasks in a safe and efficient manner, considering age and gender. We aimed to evaluate the fitness levels of Hamilton firefighters, and to determine the effects of age and gender. METHODS: In total, 89 participants were recruited. The modified Canadian aerobic fitness test was used to determine participants' estimated maximal oxygen consumption (VO2max) levels. For upper and lower body strength levels, a calibrated J-Tech hand-held dynamometer and a National Institute for Occupational Safety and Health (NIOSH) lifting device was used respectively. RESULTS: Firefighters' mean (SD) VO2max level was 40.30 ± 6.25 ml·kg-1·min-1. Age proved to have a statistically significant impact on VO2max (p < 0.001). Gender displayed statistically significant effects on strength levels. Firefighters' age was the only statistically significant independent variable, and accounted for 61.00% of the variance in firefighters' aerobic capacity levels. CONCLUSIONS: Firefighters possessed somewhat similar aerobic capacities but much higher levels of body strength when compared with the general population. With age, firefighters' aerobic capacities decreased; however, their upper and lower body strength levels remained the same.

The Relationship between Physical Fitness and Simulated Firefighting Task Performance.

The overall aim of this study was to measure the physiological responses of firefighters from a single fire service during simulated functional firefighting tasks and to establish the relationship between physical fitness parameters and task performance. 46 males and 3 females firefighters were recruited. Firefighters' aerobic capacity levels were estimated using the Modified Canadian Aerobic Fitness Test (mCAFT). Grip strength levels, as a measure of upper body strength levels, were assessed using a calibrated J-Tech dynamometer. The National Institute for Occupational Safety and Health (NIOSH) protocol for the static floor lifting test was used to quantify lower body strength levels. Firefighters then performed two simulated tasks: a hose drag task and a stair climb with a high-rise pack tasks. Pearson's correlation coefficients (r) were calculated between firefighters' physical fitness parameters and task completion times. Two separate multivariable enter regression analyses were carried out to determine the predictive abilities of age, sex, muscle strength, and resting heart rate on task completion times. Our results displayed that near maximal heart rates of ≥88% of heart rate maximum were recorded during the two tasks. Correlation (r) ranged from -0.30 to 0.20. For the hose drag task, cardiorespiratory fitness and right grip strength (kg) demonstrated the highest correlations of -0.30 and -0.25, respectively. In predicting hose drag completion times, age and right grip strength scores were shown to be the statistically significant (p < 0.05) independent variables in our regression model. In predicting stair climb completion times, age and NIOSH scores were shown to be the statistically significant (p < 0.05) independent variables in our regression model. In conclusion, the hose drag and stair climb tasks were identified as physiological demanding tasks. Age, sex, resting heart rate, and upper body/lower body strength levels had similar predictive values on hose drag and stair climb completion times.

Psychometric properties of the Zephyr bioharness device: a systematic review.

BACKGROUND: Technological development and improvements in Wearable Physiological Monitoring devices, have facilitated the wireless and continuous field-based monitoring/capturing of physiologic measures in healthy, clinical or athletic populations. These devices have many applications for prevention and rehabilitation of musculoskeletal disorders, assuming reliable and valid data is collected. The purpose of this study was to appraise the quality and synthesize findings from published studies on psychometric properties of heart rate measurements taken with the Zephyr Bioharness device. METHODS: We searched the Embase, Medline, PsycInfo, PuMed and Google Scholar databases to identify articles. Articles were appraised for quality using a structured clinical measurement specific appraisal tool. Two raters evaluated the quality and conducted data extraction. We extracted data on the reliability (intra-class correlation coefficients and standard error of measurement) and validity measures (Pearson/Spearman's correlation coefficients) along with mean differences. Agreement parameters were summarised by the average biases and 95% limits of agreement. RESULTS: A total of ten studies were included: quality ratings ranged from 54 to 92%. The intra-class correlation coefficients reported ranged from 0.85-0.98. The construct validity coefficients compared against gold standard calibrations or other commercially used devices, ranged from 0.74-0.99 and 0.67-0.98 respectively. Zephyr Bioharness agreement error ranged from - 4.81 (under-estimation) to 3.00 (over-estimation) beats per minute, with varying 95% limits of agreement, when compared with gold standard measures. CONCLUSION: Good to excellent quality evidence from ten studies suggested that the Zephyr Bioharness device can provide reliable and valid measurements of heart rate across multiple contexts, and that it displayed good agreements vs. gold standard comparators - supporting criterion validity.

Identifying the critical physical demanding tasks of paramedic work: Towards the development of a physical employment standard.

Public safety related occupations including police, fire and military commonly apply physical employment standard (PES) to facilitate job matching, an approach to evaluate if candidates demonstrate acceptable physical capabilities as required to perform the job safely and effectively. In Canada, paramedics remain as one of the few public safety occupations without an evidence-based, validated PES. The purpose of this study was to document and describe the physical demands of paramedic work and to identify the most physically demanding tasks. These outcomes are essential to inform the design and development of an evidence-based PES for the paramedic sector. Physical demands of paramedic work were documented and described using a direct observation-based task analysis technique. Five paramedic's were trained to document the physical demands of their work, then applied their training to observe more than 90 calls over the course of 20 full 12-h work shifts. Physical demands data were then listed in a survey, administered service-wide, where 155 frontline paramedics identified critically demanding tasks and rank-ordered physical demands from not physically demanding to very strongly demanding. Critically important and physically demanding tasks were identified such as: transferring a patient; loading or unloading a stretcher in to or out of the ambulance; performing CPR; and, raising and lowering a stretcher. It is important that a paramedic-based PES evaluate a candidate's physical capabilities to perform the critical and physically demanding tasks identified in this study.

Survey of kinesiologists' functional capacity evaluation practice in Canada.

BACKGROUND: In Canada, functional capacity evaluations (FCEs) are commonly administered by several health care professions including kinesiologists. Kinesiologists have been recently regulated as health care professionals in Ontario and we know little about their demographics, the frequency of FCE administration, or the types of FCEs used by this group. OBJECTIVE: The purposes of this study were to identify: 1) the demographic characteristics and FCE education of kinesiology FCE practitioners; 2) the FCE systems most used by these practitioners and 3) the constructs from assessments used to determine functional capacity. METHODS: A survey was distributed to members of the Canadian Kinesiology Alliance. Descriptive statistics and frequency distributions were calculated from the survey responses (n = 77). RESULTS: FCE practitioners were represented by kinesiologists (79%) practicing more than 15 years and 1-5 years, who received FCE training from a certification course. ARCON (23%) was the most common FCE system used. Low-level lifting (43%), mid-lift (38%), pulling (38%) and walking (38%) are the most common FCE task components used to assess functional capacity. Although kinesiologists consider multiple factors when making decisions about task component endpoints, biomechanical observations/body mechanics are the primary methods used. CONCLUSIONS: Kinesiologists are conducting FCEs for the primary purpose of preparing return-to-work or workplace accommodation recommendations. Although functional capacity is determined using multiple factors, there is an emphasis on biomechanics and body mechanics. Focusing FCE training and research on these constructs may provide opportunities to further strengthen the reliability and validity of FCE outcomes.

Confirmatory Factor and Rasch Analyses Support a Revised 14-Item Version of the Organizational, Policies, and Practices (OPP) Scale.

Background The long version of the organizational, policies and practices (OPP) had a high burden and short versions were developed to solve this drawback. The 11-item version showed promise, but the ergonomic subscale was deficient. The OPP-14 was developed by adding three additional items to the ergonomics subscale. The aim of this study is to evaluate the factor structure using confirmatory factor and Rasch analyses in healthy firefighters. Methods A sample of 261 firefighters (Mean age 42 years, 95 % male) were sampled. A confirmatory factor and Rasch analyses were used to assess the internal consistency, factor structure and other psychometric characteristics of revised OPP-14. Results The OPP-14 demonstrates sound factor structure and internal consistency in firefighters. Confirmatory factor analysis confirmed the consistency of the original 4-domain structure (CFI = 0.97, TLI = 0.96, and RMSEA = 0.053). The 5 items showing misfit initially with disordered thresholds were rescored. The four subscales satisfied Rasch expectations with well target and acceptable reliability. Conclusions The OPP-14 scale shows a promising factor structure in this sample and remediated deficits found in OPP-11. This version may be preferable for musculoskeletal concerns or work applications where ergonomic indicators are relevant.

Relative Contribution of Lower Body Work as a Biomechanical Determinant of Spine Sparing Technique During Common Paramedic Lifting Tasks.

Paramedics represent a unique occupational group where the nature of their work, providing prehospital emergency care, makes workplace modifications to manage and control injury risks difficult. Therefore, the provision of workplace education and training to support safe lifting remains a viable and important approach. There is, however, a lack of evidence describing movement strategies that may be optimal for paramedic work. The purpose of this study was to determine if a strategy leveraging a greater contribution of work from the lower body relative to the torso was associated with lower biomechanical exposures on the spine. Twenty-five active duty paramedics performed 3 simulated lifting activities common to paramedic work. Ground reaction forces and whole body kinematics were recorded to calculate: peak spine moment and angle about the L4/L5 flexion-extension axis as indicators of biomechanical exposure; and, joint work, integrated from net joint power as a measure of technique inclusive of movement dynamics. Paramedics generating more work from the lower body, relative to the trunk, were more likely to experience lower peak L4/L5 spine moments and angles. These data can inform the development of workplace training and education on safe lifting that focuses on paramedics generating more work from the lower body.

Gender differences in fatigability and muscle activity responses to a short-cycle repetitive task.

PURPOSE: Epidemiological research has identified women to be more susceptible to developing neck-shoulder musculoskeletal disorders when performing low-force, repetitive work tasks. Whether this is attributable to gender differences in fatigability and motor control is currently unclear. This study investigated the extent to which women differ from men in fatigability and motor control while performing a short-cycle repetitive task. METHODS: 113 healthy young adults (58 women, 55 men) performed a standardized repetitive pointing task. The task was terminated when the subject's perceived exertion reached 8 on the Borg scale. The time to task termination, and changes in means and cycle-to-cycle variabilities of surface electromyography signals from start to end of the task, were compared between women and men, for the upper trapezius, anterior deltoid, biceps and triceps muscles. RESULTS: Women and men terminated the task after 6.5 (SD 3.75) and 7 (SD 4) min on average (p > 0.05). All four muscles showed an increase of 25-35 % in average muscle activity with fatigue (no significant sex differences). However, men exhibited a higher increase than women in trapezius muscle variability with fatigue (31 vs. 7 %; p < 0.05), and a decrease in biceps muscle variability where women had an increase (-23 vs. 12 %; p < 0.05). CONCLUSIONS: Our results suggest that women and men may not differ in the ability to perform repetitive tasks at low-to-moderate force levels. However, differences in motor control strategies employed in task performance may explain gender differences in susceptibility to developing musculoskeletal disorders when performing repetitive work for prolonged periods in occupational life.

An analysis of functional shoulder movements during task performance using Dartfish movement analysis software.

PURPOSE: Video-based movement analysis software (Dartfish) has potential for clinical applications for understanding shoulder motion if functional measures can be reliably obtained. The primary purpose of this study was to describe the functional range of motion (ROM) of the shoulder used to perform a subset of functional tasks. A second purpose was to assess the reliability of functional ROM measurements obtained by different raters using Dartfish software. MATERIALS AND METHODS: Ten healthy participants, mean age 29 ± 5 years, were videotaped while performing five tasks selected from the Disabilities of the Arm, Shoulder and Hand (DASH). Video cameras and markers were used to obtain video images suitable for analysis in Dartfish software. Three repetitions of each task were performed. Shoulder movements from all three repetitions were analyzed using Dartfish software. The tracking tool of the Dartfish software was used to obtain shoulder joint angles and arcs of motion. Test-retest and inter-rater reliability of the measurements were evaluated using intraclass correlation coefficients (ICC). RESULTS: Maximum (coronal plane) abduction (118° ± 16°) and (sagittal plane) flexion (111° ± 15°) was observed during 'washing one's hair;' maximum extension (-68° ± 9°) was identified during 'washing one's own back.' Minimum shoulder ROM was observed during 'opening a tight jar' (33° ± 13° abduction and 13° ± 19° flexion). Test-retest reliability (ICC = 0.45 to 0.94) suggests high inter-individual task variability, and inter-rater reliability (ICC = 0.68 to 1.00) showed moderate to excellent agreement. CONCLUSION: KEY FINDINGS INCLUDE: 1) functional shoulder ROM identified in this study compared to similar studies; 2) healthy individuals require less than full ROM when performing five common ADL tasks 3) high participant variability was observed during performance of the five ADL tasks; and 4) Dartfish software provides a clinically relevant tool to analyze shoulder function.

Identifying occupational attributes of jobs performed after spinal cord injury: implications for vocational rehabilitation.

Although individuals after spinal cord injury (SCI) demonstrate a breadth of ability and employment potential, return-to-work (RTW) outcomes are low. In Canada, only 38% of individuals RTW after SCI. Refining the process of job suitability and enhancing job search strategies have been suggested to improve RTW outcomes. Our primary study objective was to identify occupational attributes of jobs performed after SCI that might be used to inform vocational rehabilitation strategies and improve RTW outcomes after SCI. A secondary analysis of participants from the Study of Health and Activity in People with Spinal Cord Injury employed in an occupation for which they received pay, was conducted. Frequency distributions for various occupational attributes including physical demands and educational requirements were examined across 181 reported occupations. χ-tests identified whether the primary mode of mobility was related to occupational physical demands. Analysis of the physical demand attribute identified that 58% of occupations required sitting and 33% required sitting/standing or walking. Forty-four percent of occupations required upper or multiple limb coordination. Eighty-three percent of occupations required a limited strength capacity. Sixty percent of occupations required college education and 58% required an undergraduate university education. χ-analysis revealed nonsignificant associations between primary mode of mobility and physical demands. In conclusion, a breadth of occupational attributes in jobs performed by individuals after SCI was identified. These results are suggested to inform future vocational rehabilitation strategies.